Adjustable Burner with Threaded Needle Valve with adj. gas valve & flame stabilizer, LP(Cylinder) gas, 1/2"(13mm) Mixing Tube OD, 1.75 CFH, 4,270 BTU Output, 6-1/8" (156mm) Overall Height
Specifications: -Gas type: LP(Cylinder) -Mixing Tube OD: 1/2" (13mm) -CFH*: 1.75 -BTU Output*: 4,270 -Overall Height: 6-1/8" (156mm) *Note: CFHs and BTU Outputs
General Purpose Tirrill Burner with 1/2" (13mm) dia. Mixing Tube, Artificial gas, 7/16"(11mm) Mixing Tube ID, 18 CFH, 10,800 BTU Output, 5-1/4" (133mm) Overall Height
Specifications: -Gas type: Artificial -Mixing Tube OD: 7/16" (11mm) -CFH*: 18 -BTU Output*: 10,800 -Overall Height: 5-1/4" (133mm) *Note: CFHs and BTU Outputs a
General Purpose Tirrill Burner with flame stabilizer, Natural gas, 7/16"(11mm) Mixing Tube ID, 5.5 CFH, 5,638 BTU Output, 6" (152mm) Overall Height
Specifications: -Gas type: Natural -Mixing Tube OD: 7/16" (11mm) -CFH*: 5.5 -BTU Output*: 5,638 -Overall Height: 6" (152mm) *Note: CFHs and BTU Outputs are figu
General Purpose Tirrill Burner for use with LP gas, LP(Cylinder) gas, 7/16"(11mm) Mixing Tube ID, 3 CFH, 7,320 BTU Output, 6" (152mm) Overall Height
Specifications: -Gas type: LP(Cylinder) -Mixing Tube OD: 7/16" (11mm) -CFH*: 3 -BTU Output*: 7,320 -Overall Height: 6" (152mm) *Note: CFHs and BTU Outputs are f
High-Temperature Burner Venturi tube, Meker Top, Artificial gas, 1-1/2"(38mm) Mixing Tube OD, 15.6 CFH, 9,360 BTU Output, 8-1/2" (216mm) Overall Height
Specifications: -Gas type: Artificial -Mixing Tube OD: 1-1/2" (38mm) -CFH*: 15.6 -BTU Output*: 9,360 -Overall Height: 8-1/2" (216mm) *Note: CFHs and BTU Outputs
High-Temperature Burner Venturi tube, Meker Top, Natural gas, 1-1/2"(38mm) Mixing Tube OD, 12.5 CFH, 12,810 BTU Output, 8-1/2" (216mm) Overall Height
Specifications: -Gas type: Natural -Mixing Tube OD: 1-1/2" (38mm) -CFH*: 12.5 -BTU Output*: 12,810 -Overall Height: 8-1/2" (216mm) *Note: CFHs and BTU Outputs a
High-Temperature Burner Venturi tube, Meker Top, LP(Cylinder) gas, 1-1/2"(38mm) Mixing Tube OD, 4.5 CFH, 10,980 BTU Output, 8-1/2" (216mm) Overall Height
Specifications: -Gas type: LP(Cylinder) -Mixing Tube OD: 1-1/2" (38mm) -CFH*: 4.5 -BTU Output*: 10,980 -Overall Height: 8-1/2" (216mm) *Note: CFHs and BTU Outpu
Utility Blast Burner
This burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accu
Pipe Mounting-Type Burner
Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mou
Tirril Burner for Small-Scale Burning Test (ASTM D5025)
Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standa
Table Clamp
The Table Clamp is designed to support meter sticks and other round or square rods, either vertically or horizontally up to 1" (25mm) thick. The Vee's are mille
Jaw accepts up to 3/4" (19mm) dia. Rods; 1/2" (12mm) hole at right angle to jaw, 1/4-20 screw holes - comes with screws as pictured
Jaw accepts up to 3/4" (19mm) dia. Rods; 1/2" (12mm) hole at right angle to jaw, 1/4-20 screw holes
Jaw accepts up to 3/4" (19mm) dia. Rods; no hole in base, 1/4-20 screw holes in base and jaw - no screws
Jaw accepts up to 3/4" (19mm) dia. Rods; no hole in base, 1/4-20 screw holes in jaw and 5/16" - 18 screw hole in base
Jaw accepts up to 3/4" (19mm) dia. Rods; 3/4" hole at right angle to jaw 1/4"-20 screw holes in base and jaw - no screws
Thumb Screw, Long - 1/4"-20 x 1-1/4"
Clamp Holders for Extension Rings. Standard (Die-cast aluminum) with 5/16" steel thumbscrews
Clamp Holders for Extension Rings. Standard (Brass) with 5/16" steel thumbscrews
Adjustable: Aluminum, with 1/4"-20 steel thumbscrews. Swivels and locks to any angle
Lincoln Type, Double Burette Clamp
Fitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)
