Dial Test Indicator
Pulgadas SR1 anvil 5.6 Con reloj comparador (ceramica) yunque de cerámica Código Rango Indicador Precisión Repetibilidad 10-18.5mm/ 2853-10 0.4-0.7" 2721-04 0.2
Hook Type Vernier Caliper
Can measure width of grooves and lands 536-172 is equipped with a fine-adjustment
Mallet, Rubber 16 oz., Rubber Mallet
Rubber Mallet with Wood Handle, used for various purposes including concrete work.
DIMENSION
> Series 515 Digital Height Master The Mitutoyo Digital Height Master uses a set of staggered 20mm/1” moveable gage blocks within the housing to provide referen
Surftest SJ-310 — On-site Surface Roughness Tester
> Individual Inch Rectangular Gage Block The Mitutoyo individual inch rectangular gage blocks are ideal when one length of gage block is being used repeatedly.
Guide force
Carbide-tipped contact point and anvil for Optional extension rods can be attached for
#60 Replacement Screen for use with H-3903 Sieve Set
Digital Caliper
Non waterproof Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Battery CR2032 Made of stainless steel
500g Attachment Weight
500g Attachment Weight. For use with models: H-4603, H-4604, H-4605, H-4835, H-4837
Micrometer Heads — Medium-sized Standard Type
Spindle pitch: 0.025 in Measuring face: Material/Carbide tip (only long spindle model is alloy
Hydraulic Cylinder - Single Acting Spring Return
Hydraulic Cylinder - Single Acting Spring Return, 700 bar, double acting
Outside Micrometers — with Interchangeable Anvils
Measuring face of the spindle is carbide tipped IP65 water/dust protection. Equipped with Ratchet Stop for constant With SPC data output.
Indicator / Dial Gage
> Micrometer Heads-Ultra-Small/Small Type The Mitutoyo small and ultra-small micrometer heads provide highly accurate positioning adjustments for limited space
50, 65 B +1.5 / +6.5 +27.5 / +32.5 30 18 – 164, 152
Supplied with Go and No-Go gauges together Class H7 Hardness HRC 60±2 Standard DIN7150-2
Disc Micrometers — Non-rotating Spindle Type
> Series 369 Disc Micrometer-Non-Rotating Spindle The Mitutoyo Digimatic non-rotating spindle disc micrometer is designed to measure the root tangent length of
Offset Centerline Caliper — ABSOLUTE Digimatic Type
Power source: SR44 battery (1 pc.), 938882 included as standard (for operational chec
Micrometer
> Individual Inch Rectangular Gage Block The Mitutoyo individual inch rectangular gage blocks are ideal when one length of gage block is being used repeatedly.
7.90-8.15, 8.15-8.41, 8.41-8.66) 23.80-24.59, 24.59-24.80)
Wrench is needed to install pins Clamping bushes (0.2~7.14mm) are made of brass, clamping bushes (7.14~24.80mm) are made of aluminum
Caliper / Height Gage
> Series 534 Vernier Scale Caliper with Long Nib-Style Jaws The Mitutoyo Vernier caliper with long-style nib jaws takes highly accurate inside and outside dimen
Lab Oven, Gravity Convection; 450°F (232°C), 1.27 cu. ft. (35L) capacity. Hydraulic temperature controller, ±1° sensitivity. 230V, 50/60 Hz, 1000 watts,Inside: 13" x 13" x 13" (330 x 330 x 330mm) Overall: 15" x 15" x 21"
Setting Ring
For zero setting of inside micrometers, three points internal micrometers and bore gauges The size marked on the setting ring is checked at the direction of the
Ohaus Defender 5000 Standard Bench Scale, Low-Profile, 125kg / 250lb x 5g / 0.01lb – 220V 50/60Hz – Platform: 18" x 18" 457mm x 457mm
Offset Centerline Caliper — ABSOLUTE Digimatic Type
Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) Battery life: App
Digital Outside Micrometer
Meet DIN863-3 Measure over-pin diameter of gears Ratchet stop Supplied with setting standards (except 0-25mm)
