Micrometer
> Individual Inch Rectangular Gage Block The Mitutoyo individual inch rectangular gage blocks are ideal when one length of gage block is being used repeatedly.
Rubber Stoppers for Erlenmeyer Flask Rubber Stoppers For 4,000 ml Flasks
Digital Dial Indicator
Meet DIN2270 (except 2380-02, 2381-02, 2381-021) Jeweled bearing Carbide contact point Two measuring directions Supplied with two clamps: diameter Ø4mm and Ø8mm
Antioxidante, No Endurecido Baja Precisión
DIN875 grade 2 Made of carbon steel, no anti-rust treatment, not hardened
Triaxial Cell, 2.0" Top Cap Only, Anodized Aluminum
Bore Gages — for Blind Holes
> Series 148 Micrometer Heads-Common Type-Small-Zero-Adjust The Mitutoyo smaller-sized standard micrometer head with zero-adjustable thimble is shorter in lengt
Indicator / Dial Gage
> Micrometer Heads-Ultra-Small/Small Type The Mitutoyo small and ultra-small micrometer heads provide highly accurate positioning adjustments for limited space
Digital Caliper
Measure groove diameter Buttons type A: on/off, set, mm/inch, preset (+, -), type B: on/off, zero, mm/inch, type C: on/off, zero, mm/inch, ABS/REL, hold Battery
Reglas Del Aluminio Pulgadas Reglas Rígidas
Graduation: 0.5mm, 1mm, 1/64", 1/32", 1/16" Rigid rulers Made of stainless steel Non-glare surface
Hydraulic Cylinder - Single Acting with Accessories
Hydraulic Cylinder - Single Acting with Accessories, 200 ton, double acting
Hammer Assemblies, Sliding Weight, 10 lb (for 4" Hammer)
Replacement compaction hammer only, no foot, 10 lb (for 4" mold) For use with all Heavy-Duty, Automatic, Single Marshall Compactors.
These ultraviolet corrected objectives are designed so that
> Series 515 Digital Height Master The Mitutoyo Digital Height Master uses a set of staggered 20mm/1” moveable gage blocks within the housing to provide referen
Setting Ring
For zero setting of inside micrometers, three points internal micrometers and bore gauges The size marked on the setting ring is checked at the direction of the
Buffer Solution, pH 1.68 ±pH Accuracy, 1-pint
Tamping Stick
Maple wood with .625" (16mm) dia. and 6" (152mm) length.
Caliper / Height Gage
> Series 148 Micrometer Heads-Common Type-Small-Zero-Adjust The Mitutoyo smaller-sized standard micrometer head with zero-adjustable thimble is shorter in lengt
Offset Centerline Caliper — ABSOLUTE Digimatic Type
Power source: SR44 battery (1 pc.), 938882 included as standard (for operational checks) Battery life: Approx. 5 years under normal use
Tube Micrometers — Spherical Anvil and Spindle Type
> View Gallery Series 395 Spherical Face Micrometer-Spherical Anvil & Spindle The Mitutoyo digimatic coolant-proof spherical face micrometer measures the w
Imagen referencial
Micrometer
Point spindle Equipped with Ratchet Stop for constant
Standard Burner w/flame stabilizer, LP (Cylinder) gas, 1/2"(13mm) Mixing Tube OD, 1.75 CFH, 4,270 BTU Output, 6-1/8" (156mm) Overall Height
Specifications: -Gas type: LP (Cylinder) -Mixing Tube OD: 1/2" (13mm) -CFH*: 1.75 -BTU Output*: 4,270 -Overall Height: 6-1/8" (156mm) *Note: CFHs and BTU Output
UltraQuiet ™ Mary Ann® Laboratory Sifter, 120V 60Hz
Need Support?
> Series 950 Outside Spring Caliper The Mitutoyo Outside Spring Caliper precisely transfers outside measurements of wall thickness and outer dimensions. | | | T
